1. Identify the session and setup
Write the session name, recording date, microphone, recording path, and the settings relevant to matching the take. Note a meaningful change in microphone position or the room arrangement. Use the same project naming approach as the narration files so the editor can connect the sample to its intended material.
ACX’s glossary describes room tone as background room sound and, for audiobook work, the quiet resting sound of the studio. Keep that definition separate from digital silence. The goal here is a useful editing reference for this session, not a claim that a room has no sound.
Sources: [1]
2. Capture a representative quiet segment
After preparing the actual recording setup, capture a quiet segment without changing the conditions simply to make the sample appear cleaner. Keep unrelated conversation and private information out of the recording. Choose a duration useful for the project’s editing task rather than treating one number as a universal delivery requirement.
ACX’s production guidance recommends reviewing recorded room tone after setting levels. Its older article includes a specific capture example; this guide uses the preparation principle without making that duration mandatory for every workflow. Preserve the original recording alongside any later edited derivative.
Sources: [2]
3. Listen for interruptions and mismatches
Listen through the sample with headphones at a sensible monitoring level. Mark obvious interruptions such as a notification, a chair movement, or a passing conversation. Record the location of a usable segment and anything that makes the sample unsuitable. Do not label the whole file clean merely because its beginning sounded quiet.
ACX’s guidance specifically recommends headphone review for unwanted sounds. Use that check to decide whether another capture is needed while the setup remains available. A sample can reveal a problem, but it does not establish that every narration take is free of noise.
Sources: [2]
4. Label the asset and any setup change
Give the checked sample a stable filename that identifies the session and setup version. Keep a short note of the usable region and the narration files it is intended to accompany. If you provide a trimmed copy, distinguish it from the original so an editor knows which processing or selection has already occurred.
ACX’s editing guidance advises recording new room tone after microphone or studio settings change because an older sample may no longer match. Apply that distinction when handing over pickups or a later session. Avoid silently pooling all quiet recordings into one generic file.
Sources: [3]
5. Audition the edit in context
Listen across the proposed insertion with the surrounding narration, including the transition into and out of the edit. Check for an obvious change in background character or pacing. Compare the result with the untouched take, and retain a reversible edit so an unsuitable insertion can be reconsidered.
Record which sample and region were used and any remaining issue for the editor. If the match is poor, reconsider the recording or editing approach instead of assuming room tone will repair every problem. Keep current platform delivery specifications in a separate check; this article does not reproduce older ACX spacing rules or certify an audio file.
Your quick checklist
- The sample identifies its session and setup.
- Capture conditions represent the actual take.
- The full sample is reviewed for interruptions.
- Changed setups receive separately labeled material.
- Edits are auditioned against surrounding narration.
Sources & scope
ACX supports the definition, headphone review, and setup-change guidance. The asset labeling and reversible-edit workflow are ATN editorial choices. No recording was evaluated, and no universal capture length or delivery-spacing rule is asserted.
- ACX: Audio terminology glossary (opens in a new tab)Source checked October 10, 2026
- ACX: Production preparation and room-tone review (opens in a new tab)Source checked October 10, 2026
- ACX: Editing and spacing workflow (opens in a new tab)Source checked October 10, 2026
Published October 10, 2026. No affiliate links or paid placements in this guide.
